
2018-10-8Thank you for your interest in Water Pumps Direct. The working pressure on the Apache 2 PVC Lay-Flat hose is 70 PSI. You may need to contact Apache tech support at (800) 553-5455 to find the max pressure.

KLCE Oil Level Controller (Single Switch for Low Level Alarm in Explosion Proof Exclosure) Operating Principle. KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes.

2018-10-8Buy Apache Hose 98138054 Direct. Check the Apache Hose 2-Inch x 100'' PVC Lay Flat Discharge Hose ratings before checking out.

One sure way to know if you can''t use the standard V2.2 flyback circuit is to have a flyback failure.The circuit will most often fail after some time spend at high speeds and loads, rather than immediately when you start the engine for the first time.

Air Management Controllers CT-01 Towing Schrader Manual hose fill kit AIR-DIGITAL-05 Digital Pressure Sender 150psi Works only/our Digital Air Pressure Gauge

In order to make your MicroSquirt controller work on a vehicle, you will need the following additional fuel system items to suit your installation:

PumpVendor.com is your on-line source for Pumps and Parts. We have 1000''s of Pumps and Parts for Marine, RV and Industrial applications in stock, ready to ship!

MM Control Distributes the finest names in the industry including Watts, Powers Process Controls, Hedland, H O Trerice, Siemens, Pyromation, Keckley, Marsh Gauges, Bellofram.

One sure way to know if you can''t use the standard V2.2 flyback circuit is to have a flyback failure.The circuit will most often fail after some time spend at high speeds and loads, rather than immediately when you start the engine for the first time.

The Jabsco HotShot series of Washdown Pumps provides the boater of small to medium vessels with a cost conscious and size maximised higher pressure pump.

One sure way to know if you can''t use the standard V2.2 flyback circuit is to have a flyback failure.The circuit will most often fail after some time spend at high speeds and loads, rather than immediately when you start the engine for the first time.